RXG-4431

Part Number Codes

RXG = This Type of rack

44 = 44 space rack

31 is 31" deep

• 19" Gangable Full Featured Equipment rack
• Can be used as stand alone
• Optional side panels available
• 31" deep model
• Black textured powder paint finish is standard
• Top and bottom are made of 14 gauge steel, sides 16 gauge.
• Front & rear threaded rack rail is standard
• Rails are fully adjustable and can be locked in many positions.
• Top has optional covers for venting or fans
• Recessed Wheel base is available as an option
• Rear door is included, front door is optional
• Both doors open either right or left
• Rack is designed to hold up to 1000 lb of equipment
• built to Seismic zone 4 ratings(optional mounting kit is required)

SD-44

Part Number Codes

SD = Standard, Solid door

44 = 44 space rack

• Solid front door for all RXG & RME Series Racks
• This door is equipped with a flush mounted pocket handle and a key lock
• Door can be mounted either left or right opening
• Made of heavy steel, texture powder coated finish
• Mounting Hardware and Installation key included
• Optional keyless latch is available, specify R-LATCH

RX-SP44-312

Part Number Codes

RX = fits all RX series racks

SP = Side Panels(1 pr)

44 = for 44 space rack

312 = 31" deep racks

• Side Panels, 1 pair
• Made of heavy gauge steel, textured powder coat finish
• Two flush mounted posket hanbles are included
• These panels have an internal lock feature that prevent them from being removed if access is not available from the inside of the rack
• Available in 44 space rack height, 31" depths.

RX-ST

RX-VT

RX-4FT

• Standard blank rack top cover for all RX Series racks
• Made from heavy gauge steel, textured powder paint finish
• Mounting hardware included

• Vented rack top cover for all RX Series racks
• Made from heavy gauge steel, textured powder paint finish
• Mounting hardware included

• 4 x 4" fan rack top cover for all RX Series racks
• Fans are not included, optionally supplied, specify part numbers F4 & FG4 guard
• Covers are included in case not all fan locations are required
• Made from heavy gauge steel, textured powder paint finish
• Mounting hardware included

RXG-CB31

• Caster base for the 31" deep RX Series racks
• Internal fit base, when installed the rack height is raised by only 3/4"
• Load rated at 1300 lb
• 4 non-locking 3" casters are pre installed
• made from heavy gauge steel, powder coated black
• All mounting hardware is included

F4

FG4

• 4" fan option for use on the RX-4FT
• 110 volt operation, 110 CFM, 49 dba noise level
• Power cord included
• Mounting hardware included
• Fan guard optional, specify FG4
• Download Specification Sheet Soon Here

• 77" flat vertical cable lacer strip
• Designed to be used primarily inside a rack
• All steel construction, black powder coat
• Many tie points to ensure plenty of opportunities to maintain properly bundled wiring

• Set of 4 leveling feet for the RME, or RXG Series of racks
• These feet are adjustable from the inside, and the outside of the rack

• Optional keyless latch to replace the keyed tumblers in the front or rear doors, or any accessories that might have a keylock installed
• Installation hardware included.

POWER BARS - ASSORTED

• Click link to the left to find power bars