Part Number

RME-4420

RME-4020

RME-3720

RME-2720

RME-1820

Part Number Codes

RME = This Type of rack

27 = 27 space rack

20 = 20" deep

25 = 25" deep

• 19" Stand-Alone Full Featured Equipment rack
• 20" or 25" deep.
• Black textured powder paint finish is standard
• Top and bottom and sides are made of 16 gauge steel
• Front threaded rack rail is standard
• Rails are fully adjustable and can be locked in many positions.
• Top has solid tops with 4 removable 4" fan covers. Optional 4" fans or vent panels are available)
• Caster base is available as an option, this adds 3-1/2" to overall rack height
• Rear door is included, front door is optional
• Both doors open either right or left
• Rack is designed to hold up to 750 lb of equipment
• built to Seismic zone 4 ratings(optional mounting kit is required)

 

SD-44

SD-40

SD-37

SD-27

SD-18

Part Number Codes

SD = Standard, Solid door

27 = 27 space rack

• Solid front door for all RXG & RME Series Racks
• This door is equipped with a flush mounted pocket handle and a key lock
• Door can be mounted either left or right opening
• Made of heavy steel, texture powder coated finish
• Mounting Hardware and Installation key included
• Optional keyless latch is available, specify R-LATCH

RME-RR44

RME-RR40

RME-RR37

RME-RR27

RME-RR18

• Rear rack rail kit for both RME XX depth racks(where XX matches the rack height in spaces)
• Available in 44, 40, 37, 27 and 18 spack lengths.
• Hardware kit is included
• standard threaded rail, black powder coat finish
• Shipped as 1 pair

F4

FG4

• 110 volt operation, 110 CFM, 49 dba noise level
• Power cord included
• Mounting hardware included
• Fan guard optional, specify FG4

• Fan guard option for the F4, 4" fan
• radial grill type, made of steel wire, chrome plated

L-44

• 77" flat vertical cable lacer strip. This strip can be factory cut...specify lenghts required!
• Designed to be used primarily inside a rack
• All steel construction, black powder coat
• Many tie points to ensure plenty of opportunities to maintain properly bundled wiring

RME-Z4

• Seismic floor anchor brackets
• Supplied as a set of 4
• Floor mounting hardware is not provided
• If these mounts are required, it should be noted that they mount through the bottom of the equipment rack, leveling feet and any other under the rack options are not to be specified
• If a rack requires leveling, see installation sheets for details

RLF

• Set of 4 leveling feet for the RME, or RXG Series of racks
• These feet are adjustable from the inside, and the outside of the rack

RME-CB20

• Caster base for the 20" or 25" deep RME Series racks
• External, bottom fit base, when installed the rack height is raised by 3-1/2"
• Load rated at 1300 lb
• 4 non-locking 3" casters are pre-installed
• made from heavy gauge steel, powder coated textured black to match the cabinet

POWER BARS - ASSORTED

• Click link to the left to find power bars

R-LATCH

• Optional keyless latch to replace the keyed tumblers in the front or rear doors, or any accessories that might have a keylock installed
• Installation hardware included.